Product Report: RG3 Gen2 Triple Clamp
elmo
- November 20 2008
- 5,512 views
- 7 comments
Application: All KTM SX Models (tested here on a ‘09 KTM 250SX-F)
Price: $309.95
Rating: 9.5
What it is: The Gen2 Triple Clamp is the latest product to roll off the assembly line from RG3 Suspension. Made from high quality aerospace grade aluminum and hard anodized, the Gen2 Triple Clamp focuses on minimizing arm pump, reducing any vibration that may be felt in the handlebars, and also offering a less harsh feeling over square-edged bumps.
Hits: We must admit we were rather skeptical that we would actually notice any real differences in performance from the stock clamp to the RG3 clamp; however, with in a few laps, we could feel a noticeable difference in the handling and overall feel of the bike. While negotiating tight corners, the front end of our KTM 250SX-F felt very nimble, but not so much so that the front end wanted to push and take you down. And, thanks to the lighter feel up front, we were able to point the bike in any direction with relative ease and not worry about being sent into the no-man’s-land. In the past, we have also experienced headshake issues with our pumpkin when going through the small breaking bumps down fast straight-aways. However, with the Gen2 Triple Clamp, the headshake was dramatically reduced and allowed for a much smoother and enjoyable ride.
Misses: Performance wise, the Gen2 Triple Clamp far exceeded any of our expectations, however, with the economy being as sluggish as it is these days, the $309.95 price tag is rather steep. And, though it wasn’t a tremendous disappointment, it is worth noting that we did not notice a big reduction in vibration in the handlebars. However, we never noticed any issues with the vibration of the handlebars on our KTM to begin with.
Verdict: Though the 2009 KTM 250SX-F is one of the best handling bikes in its class, we were very impressed with the added improvements provided by the Gen2 Triple Clamp. Understandably, the price tag on the clamp may be a bit steep, however, if you’re looking for something to improve the handling and reduce headshake and vibration in your handlebars, we highly recommend you pick yourself up the Gen2 Triple Clamp from RG3. If you have the money, the upgrade is well worth it.
Contact: www.rg3suspension.com









To upload photos or videos,
»







November 21st, 2008 at 2:56 pm
how about bar positions, how many?
November 21st, 2008 at 3:25 pm
They have two different, stock and one that is 5mm higher and 3mm forward. But you cant change it like on a protaper trippleclamp. I have this clamp and they are the best one out there that you can buy i think. Its very light to compared to the stock.
November 22nd, 2008 at 8:58 am
nice, thanks for that info bud.
December 14th, 2008 at 4:09 pm
best thing for arm pump you’ll ever see.
throw your cheap pro taper/pro circuit/tag boat anchors in the trash and get one that actually does something.
September 14th, 2009 at 8:08 am
best clamp you can buy, Ive had these on all of my bikes for the past 8 years. I have the neg. off-set top and bottoms on my 09 and it knifes under any bike out there.RG3 is first rate, all of the people involved with the company are very professional
November 14th, 2009 at 11:27 am
Agreed, These clamps are one of the best investments. They save you a lot of time and money by not letting the bars bend in a crash, the rubber mounts will rip and tear but not the bars… especially with the four post design, the bars become much more stable and you have a lot more control over your bike. No BS.
November 14th, 2009 at 11:29 am
Brian - If youre getting paid to run something you WILL run it so don't try to pull that, No doubt pro circuit has the best team out there… doesn't mean they have the best products. Pro circuit is run off of it's name…
hands down, RG3 clamps slap PC out of the water.
not to mention the boys at RG3 are helpful, not like another company *cough cough